Anchors Secure

Our Services include:
Anchor setting and testing for 2 to 4 minutes at 24,000 lbs with copies of charts available online
Rig anchoring,
Pipe line support Anchoring,
Foundation Anchoring,
Tie-back Anchoring,
Communication tower anchoring, and
auger services/ hole boring, with diameters of 6″, 10″, 18″, and 24″ with depths up to 12 feet deep.
Oilfield Division:
Guy line anchors are one of the most over looked safety hazards in the oil industry today. There are guy line anchors still in use today that were installed as far back as 50+ years ago. Most of the older types were made out of Sucker Rod, or rolled steel that were not properly galvanized to protect against Corrosion and do not meet current OSHA Safety Standards.
What we offer in solving all Guy Line Hazards is a complete anchor services. At each location, we locate all anchors and test each anchor to a desired pull test. The pull test is done with a certified testing unit. Each pull will be recorded on a chart recorder which will be turned into your well file. After testing, we will tag the anchors with the date tested and, we will mark the location of the anchor with a yellow marker. An anchor test chart will be posted on our web site showing that each anchor was tested for 2 to 4 minutes at 24,000 lbs which can be pulled up for OSHA.
20150408_180437_HDRThe next time you have the need for a pulling unit to rig up on this location, you will not have to worry about the anchors. They will be easy to locate, cutting down on standby or down time for the pulling unit. In addition, you will have no safety hazard concerns about the quality of the anchors.
Pipeline Support Anchoring: This system can be used to Tie down High Pressure pipelines, Tie-down (Frac) Bleed off Pipelines and can also be used to achieve Instant Pipeline support which replaces the expensive systems currently used in most oilfields field. The system is adjustable to the terrain and requires no advance site preparation, No Concrete required, Support anchors can be installed and pipelines set immediately. Salvageable supports that can be removed and relocated and reused. This all adds up to substantial cost savings.
For areas with soft or wet soil such as river beads Anchors Secure has experience with “Deep Digging – Helix Style Earth Anchors”. Where other anchors could not pass pressure tests the Helix can go deeper and hold stronger.
Construction Division:
Our Construction Division includes Foundation Support Anchoring, Tower Anchoring, and Hole Boring
Foundation Support Anchoring
Using Chance Galvanized Steel Foundations. They are “Instant” because they can be installed so readily, conveniently compared to concrete- poured or pre-cast foundations. Chance galvanized steel foundations offer a cost savings, versatile alternative to cast in place or pre-cast concrete foundations. They have been precisely engineered and field tested. Foundation systems include Pad Support, Substation Column Support, Streetlight Foundations.
Advantages: Lower installation costs, One trip convenience – No excavation required, no concrete required, Instant foundation and immediately set the equipment, Salvageable foundation for relocation and reuse.
Tower Anchoring201506139511574895HDR
Installation of Helical ground anchors to support communication towers.
Advantages: Anchors can be tested at installation. Anchors can be removed and reused at a different site.
Hole Boring
Capable of holes with diameter of 6″, 10″, 18″, and 24″ with depths up to 12 feet deep.
If you have any questions about our complete anchor installation and testing services please call us at (432) 813- 4123 or (432) 813-4109